The NeuroTrac™ Labour TENS is an advanced and modern digital dual
channel TENS unit featuring a dedicated Labour Pain programme.
Three different treatment modes provide maximum flexibility for
pain relief.
TENS can help with obstetric or Labour pain and has an 80%
efficacy rate. If you are about to have a baby, the NeuroTrac™
Labour TENS may be able to help and provide a safe alternative to
drug based pain therapy.
Reliable and easy to use!
Features and Benefits
Suitable for Obstetrics and Labour pain relief
Digital Dual Channel Obstetrics TENS unit
1 Dedicated Labour Pain programme for ease of use
Remote Boost switch for additional pain control at times of
intense pain
No known side effects for mother or baby
For use during labour
User friendly
Compact, light and reliable
How Does TENS Relieve Pain?
Conductive electrodes are used to transmit electrical impulses
from the stimulator to the nerve fibres. Pain relief is achieved
by two distinct different mechanisms. Using high frequency TENS,
stimulation of the large diameter nerve fibres acts as a 'Gate
Control' to block pain transmission. Alternatively by using low
frequency 'Burst' Stimulation, an increase in the body's own pain
relieving endorphins/encephalins provides analgesia.
TENS Control of Labour Pain
The NeuroTrac™ Labour TENS uses either four long skin electrodes
or two very long skin electrodes. If using four of the smaller
skin electrodes, the upper pair are placed between the T10 and L1
meridians and the lower pair are placed between the S2 and S4
meridians. The stimulation is adjusted until a mild tingling
sensation is felt. By using the Remote Switch either Rest mode
(Bursts of low frequency TENS) or Boost mode (Continuous high
frequency TENS) may be selected.
Rest mode is used between contractions and Boost mode during the
contractions
It has been shown that TENS can be an effective technique for pain
control in over 80% of cases.
Specifications
Digital Dual Channel Obstetrics TENS unit
1 Dedicated Labour Pain programme for ease of use
Remote Boost switch for additional pain control at times of
intense pain
Continuous Mode (Boost): 90 Hz @ 220 µS
Burst Mode (Rest): 2 Hz Bursts. Bursts of 9 pulses @ 200 µS and
150 Hz repeating twice per second
Constant Current (extends battery life)
Automatic switch off after 4 minutes if unit is not in use
User friendly
Applications
The NeuroTrac™ Labour TENS Is dedicated to treating Labour pain
and is not recommended to be used for any other purpose. This unit
should only be used during Labour.
Price:
Ł41.50 including p&p , UK mainland only
How to buy this Product with Paypal
Step
1. Click the Vat Declaration button below and fill in the
simple form.
Step 2.
After completing the form
click the Send Form button.
Step3. You will receive
an immediate acknowledgement after sending
the form. On its arrival
click the Return to Tens Page button to
return to this page.
Step 4. Click the Add To
Basket button to complete your order through Paypal.
